Metal

Safety (Bench Drill)l -   In terms of using bench drills u need to have a partner to help u switch  off the drill  if something bad happened to you.You also need to wear safety glasses to protect your eye in any piece of metal might get to your eye.

Safety (Bench Buffing Machine) - In using polishing machine in order to be safe u need to wear face shield to protect your whole face because your  metal might hit your face during the polishing 

 This pictures are my finish products which are F shapes and my drill gauge

 What I've done the the F shape is I measured a piece of metal then i cleaned it using sand paper   and i cut it using hack saw then I put blue layout fluid so i can see my marking easily then I measured the gaps equally where i used ruler and a vernier to get a accurate measure after that i did the same thing again to make the other side

What I've done in my drill gauge is I measured and  cut a piece of metal and then i cleaned it using sand paper and then i put a blue layout fluid so i can see my marking clearly after that i started marking where i'm going to drill the holes after I've done the holes i started cleaning it again using sand paper after i removed the rust i started polishing it using a machine called bench buffing machine.